Fog Machine | 550W Hazer with DMX and Remote | SANYI LIGHTS
+1 626-408-8003

California, USA

15% OFF

MIST 2L

SY-800

2L TANK 550W haze machine with a 2-minute preheat, adjustable output angle, and DMX, manual or remote control. The MIST 2L is a popular choice for DJ booths, club stages and theatre.

$339.00

✔
2-Minute Preheat550W
Ready before the doors open instead of halfway through the first set
✔
A 2L Tank Made For Full SetsFewer Refills
Keeps haze in the air for a whole show without stopping to top it up
✔
Three Control PathsDMX · Remote · Manual
Take 2 channels from the console, hand the remote to the operator, or run it by hand
✔
Adjustable Haze AngleCooling Fan
Point the output where the beams are, not just straight ahead
✔
6.4 kg, One-Person SetupIEC Input
Carried and positioned by one person, with a standard power lead

Shop by use case: Club & Bar · Halloween · Special Event

In stock · Ships within 1-2 business days

Checkout safely using your preferred payment method

From:

$339.00

Main Features

A 550W hazer with a 2L tank, a 2-minute preheat and DMX, manual and remote control, in a 6.4 kg body — atmospheric haze for beams and lasers without a console operator standing over it all night.

2-Minute Preheat Changes the Load-In

Most hazers make you build dead time into the schedule: power up, wait, then start focusing. The MIST 2L reaches operating temperature in 2 minutes, so the machine can be switched on while the rig is still going up and is ready the moment you start pointing at beams. On a one-day event that is the difference between the haze being there for the first walk-through and the haze being there halfway through the opening number.

A 2L Tank Made for Full Sets

The tank holds 2 liters of fluid, which is the number that decides how often you stop. Smaller units force a refill break in the middle of a set; a 2L tank is sized so the effect runs continuously through a club night, a theatre run or a corporate program. Refilling is a quick job rather than a scheduled interruption, which matters most when there is no one free to do it.

550W of Heating Power on AC110V

The 550W heater is what turns fluid into visible atmosphere fast enough to matter. It draws on AC110V at 50Hz through an IEC input and is protected by a 5A fuse. Because the output is adjustable rather than fixed, you can dial in a thin haze that only shows in the beams or push it further for a thick, rolling look over a dance floor — from the same machine.

Three Control Paths, One Machine

The MIST 2L answers to DMX, to the remote, and to manual operation. On a show, 2CH of DMX lets you put haze on the console and trigger it in step with a lighting cue, so the atmosphere arrives exactly when the look changes. On a job with no console on site, the remote or the on-board control does the same work without a desk in the room.

Adjustable Angle and a Cooling Fan

Haze that dumps straight up stays near the ceiling; haze pushed out flat and spread by the fan fills the volume the beams actually travel through. The output angle is adjustable and the cooling fan keeps the machine working consistently through a long night rather than fading out as it heats up. That consistency is what makes beams and lasers read properly from the back of the room.

A 6.4 kg Body and a Case Option

At 6.4 kg (14.11 lb) and 390 × 271 × 290 mm, the MIST 2L is a one-person lift and fits on a shelf, a table or a case lid. The $339 package ships the machine in its road case — the version for anyone moving it weekly. Working range is −10°C to 40°C (−14°F to 104°F).

WHO IT’S BUILT FOR

Mobile DJs and small event crews
Haze is what makes a moving beam look like a moving beam, and the MIST 2L is small enough to be part of a one-person setup. It reheats in 2 minutes, so it can be running before the first guests arrive, and the remote lets you trigger it from behind the booth without leaving the mixer. The 2L tank covers a reception or a party without a refill.
Clubs and live music venues
A house rig needs atmosphere that stays up all night. 550W of heating power backed by a 2L tank holds a continuous haze through a full club night, and 2CH of DMX lets the operator fire it from the lighting desk in time with cues instead of leaving it on. The adjustable output angle and cooling fan keep the level steady as the room fills up.
Theatres, school halls and community venues
Manual and remote control mean a volunteer or a stage manager can run haze without touching the lighting console. The 2-minute preheat fits into a normal preshow check, and the black housing and 6.4 kg weight let it sit unobtrusively at the side of a stage or behind a set piece. Simple to operate, simple to store.
Rental companies and touring productions
An effect machine spends its life in and out of a vehicle. The $339 package ships in the road case, which is the version that survives a touring schedule. IEC input and 3-pin XLR are the connectors already on most rigs, so it drops into an existing chain.
Indoor use only
The MIST 2L carries an IP20 rating and is built for covered indoor rooms — clubs, bars, churches, halls and stages. It is not weather-sealed and should not be used in rain or in an exposed outdoor position; for weather-exposed events choose an IP65-rated fixture from our outdoor range instead.

Where It Fits

Haze and mist are what make beams visible, so this is the fixture behind the look: DJ booths, club and theatre stages, small venue shows, photo shoots and production rehearsals.

FREQUENTLY ASKED QUESTIONS

What kind of machine is the MIST 2L — fog or haze?
It is a hazer that produces a fine, even atmospheric haze, plus a direct spray output and an adjustable haze output angle. That fine haze is what makes beams, lasers and moving light effects visible in the air. Heating power is 550W from a 2L tank on AC110V, with a 5A fuse, and the whole machine weighs 6.4 kg (14.11 lb).
How long does it take to be ready after switch-on?
2 minutes. That is the pre-heating time for the MIST 2L, which is short enough to fit inside a normal load-in rather than forcing you to build in dead time. Power it up while the rig is still going together and it is producing haze when you start focusing.
Do I need a DMX controller to run it?
No. Control mode is Manual, Remote or DMX, so you can operate it by hand or with the remote and never connect a console. If you do patch it, 2CH of DMX over 3-pin XLR input/output lets you put haze on the lighting desk and fire it with a cue alongside the rest of the show.
Which package should I buy?
It is the same machine — every order ships in the road case, which protects it in transit between jobs.
Can I use it outdoors?
No. The MIST 2L is IP20-rated for indoor use — clubs, bars, churches, halls, theatres and other covered rooms. It is not weather-sealed, so for outdoor or weather-exposed events choose an IP65-rated fixture from our outdoor range instead.
What does it need for power and connections?
AC110V at 50Hz with a 550W draw and a 5A fuse, on an IEC input. DMX runs over a DMX 3-pin XLR input/output. The 2L tank holds enough fluid for a full event without topping up, and the working ambient range is −10°C to 40°C (−14°F to 104°F).
Will it run all night without fading?
The cooling fan is there to hold performance steady as the machine heats up, which is what stops the haze thinning out towards the end of a long night. The adjustable output angle lets you aim the haze where the beams are rather than filling the ceiling. Every order includes free shipping on most products across the USA, a 1-year warranty and a 30-day return policy.

Everything you need for the MIST 2L
The user manual and the technical specification sheet for the MIST 2L — everything the factory publishes for this hazer in one folder.
USER'S MANUAL  ·  TECHNICAL SPECIFICATIONS  ·  FIXTURE'S PROFILE
Building a full rig?
The Download Center holds every SANYI LIGHTS fixture profile in one place — grab the whole set instead of one by one.
Open the Download Center →

Free shipping on most products across the USA — plus a 1-year warranty and a 30-day return policy on every order.

Designed for Creators.

Built for the Stage.

High Output

Performance

RGBW Color 

System

DMX & Wireless
Control

Venue-Ready

Build

Plug & Play 

Simplicity

Overview

This compact and powerful fixture is engineered for performers who demand precision and impact. With crystal-clear output, seamless wireless control and reliable DMX integration, it’s the go-to lighting solution for professionals on the move.

Perfect For

Overview

This compact and powerful fixture is engineered for performers who demand precision and impact. With crystal-clear output, seamless wireless control and reliable DMX integration, it’s the go-to lighting solution for professionals on the move.

Creator insinght

customer reviews

Overview

This compact and powerful fixture is engineered for performers who demand precision and impact. With crystal-clear output, seamless wireless control and reliable DMX integration, it’s the go-to lighting solution for professionals on the move.

Creator Insight

Customer
Reviews

Specifications & Features

Main Features

A 550W hazer with a 2L tank, a 2-minute preheat and DMX, manual and remote control, in a 6.4 kg body — atmospheric haze for beams and lasers without a console operator standing over it all night.

2-Minute Preheat Changes the Load-In

Most hazers make you build dead time into the schedule: power up, wait, then start focusing. The MIST 2L reaches operating temperature in 2 minutes, so the machine can be switched on while the rig is still going up and is ready the moment you start pointing at beams. On a one-day event that is the difference between the haze being there for the first walk-through and the haze being there halfway through the opening number.

A 2L Tank Made for Full Sets

The tank holds 2 liters of fluid, which is the number that decides how often you stop. Smaller units force a refill break in the middle of a set; a 2L tank is sized so the effect runs continuously through a club night, a theatre run or a corporate program. Refilling is a quick job rather than a scheduled interruption, which matters most when there is no one free to do it.

550W of Heating Power on AC110V

The 550W heater is what turns fluid into visible atmosphere fast enough to matter. It draws on AC110V at 50Hz through an IEC input and is protected by a 5A fuse. Because the output is adjustable rather than fixed, you can dial in a thin haze that only shows in the beams or push it further for a thick, rolling look over a dance floor — from the same machine.

Three Control Paths, One Machine

The MIST 2L answers to DMX, to the remote, and to manual operation. On a show, 2CH of DMX lets you put haze on the console and trigger it in step with a lighting cue, so the atmosphere arrives exactly when the look changes. On a job with no console on site, the remote or the on-board control does the same work without a desk in the room.

Adjustable Angle and a Cooling Fan

Haze that dumps straight up stays near the ceiling; haze pushed out flat and spread by the fan fills the volume the beams actually travel through. The output angle is adjustable and the cooling fan keeps the machine working consistently through a long night rather than fading out as it heats up. That consistency is what makes beams and lasers read properly from the back of the room.

A 6.4 kg Body and a Case Option

At 6.4 kg (14.11 lb) and 390 × 271 × 290 mm, the MIST 2L is a one-person lift and fits on a shelf, a table or a case lid. The $339 package ships the machine in its road case — the version for anyone moving it weekly. Working range is −10°C to 40°C (−14°F to 104°F).

WHO IT’S BUILT FOR

Mobile DJs and small event crews
Haze is what makes a moving beam look like a moving beam, and the MIST 2L is small enough to be part of a one-person setup. It reheats in 2 minutes, so it can be running before the first guests arrive, and the remote lets you trigger it from behind the booth without leaving the mixer. The 2L tank covers a reception or a party without a refill.
Clubs and live music venues
A house rig needs atmosphere that stays up all night. 550W of heating power backed by a 2L tank holds a continuous haze through a full club night, and 2CH of DMX lets the operator fire it from the lighting desk in time with cues instead of leaving it on. The adjustable output angle and cooling fan keep the level steady as the room fills up.
Theatres, school halls and community venues
Manual and remote control mean a volunteer or a stage manager can run haze without touching the lighting console. The 2-minute preheat fits into a normal preshow check, and the black housing and 6.4 kg weight let it sit unobtrusively at the side of a stage or behind a set piece. Simple to operate, simple to store.
Rental companies and touring productions
An effect machine spends its life in and out of a vehicle. The $339 package ships in the road case, which is the version that survives a touring schedule. IEC input and 3-pin XLR are the connectors already on most rigs, so it drops into an existing chain.
Indoor use only
The MIST 2L carries an IP20 rating and is built for covered indoor rooms — clubs, bars, churches, halls and stages. It is not weather-sealed and should not be used in rain or in an exposed outdoor position; for weather-exposed events choose an IP65-rated fixture from our outdoor range instead.

Where It Fits

Haze and mist are what make beams visible, so this is the fixture behind the look: DJ booths, club and theatre stages, small venue shows, photo shoots and production rehearsals.

FREQUENTLY ASKED QUESTIONS

What kind of machine is the MIST 2L — fog or haze?
It is a hazer that produces a fine, even atmospheric haze, plus a direct spray output and an adjustable haze output angle. That fine haze is what makes beams, lasers and moving light effects visible in the air. Heating power is 550W from a 2L tank on AC110V, with a 5A fuse, and the whole machine weighs 6.4 kg (14.11 lb).
How long does it take to be ready after switch-on?
2 minutes. That is the pre-heating time for the MIST 2L, which is short enough to fit inside a normal load-in rather than forcing you to build in dead time. Power it up while the rig is still going together and it is producing haze when you start focusing.
Do I need a DMX controller to run it?
No. Control mode is Manual, Remote or DMX, so you can operate it by hand or with the remote and never connect a console. If you do patch it, 2CH of DMX over 3-pin XLR input/output lets you put haze on the lighting desk and fire it with a cue alongside the rest of the show.
Which package should I buy?
It is the same machine — every order ships in the road case, which protects it in transit between jobs.
Can I use it outdoors?
No. The MIST 2L is IP20-rated for indoor use — clubs, bars, churches, halls, theatres and other covered rooms. It is not weather-sealed, so for outdoor or weather-exposed events choose an IP65-rated fixture from our outdoor range instead.
What does it need for power and connections?
AC110V at 50Hz with a 550W draw and a 5A fuse, on an IEC input. DMX runs over a DMX 3-pin XLR input/output. The 2L tank holds enough fluid for a full event without topping up, and the working ambient range is −10°C to 40°C (−14°F to 104°F).
Will it run all night without fading?
The cooling fan is there to hold performance steady as the machine heats up, which is what stops the haze thinning out towards the end of a long night. The adjustable output angle lets you aim the haze where the beams are rather than filling the ceiling. Every order includes free shipping on most products across the USA, a 1-year warranty and a 30-day return policy.

Technical Specification — SY-800

Full factory specification for the MIST 2L (SY-800). A 550W hazer with a 2L tank, a 2-minute preheat time and Manual / Remote / DMX control, in a 6.4 kg (14.11 lb) housing.
Electrical
Input powerAC110V
Power frequency50Hz
Power consumption550W
Fuse5A
Smoke Effects
OutputDirect spray
AngleHaze output angle adjustable
Control
DMX channels2CH
DMX connectorDMX 3-pin XLR input/output
Power connectorIEC input
Control modeManual / Remote / DMX
Pre-heating time2 minutes
Housing & Physical
IP ratingIP20 — indoor use only
Housing colorBlack
Tank capacity2L
Working ambient temp.−10°C to 40°C (−14°F to 104°F)
Product dimensions390 × 271 × 290 mm (15.4 × 10.7 × 11.42 in)
Weight6.4 kg (14.11 lb)
Everything you need for the MIST 2L
The user manual and the technical specification sheet for the MIST 2L — everything the factory publishes for this hazer in one folder.
USER'S MANUAL  ·  TECHNICAL SPECIFICATIONS  ·  FIXTURE'S PROFILE
Building a full rig?
The Download Center holds every SANYI LIGHTS fixture profile in one place — grab the whole set instead of one by one.
Open the Download Center →

SEE HOW IT WORKS

Reviews

Be the first to review “MIST 2L”

Your email address will not be published. Your review will show your first name and the first letter of your last name — for example “John D.”

Reviews

Designed for Creators.

Built for the Stage.

High Output

Performance

RGBW Color 

System

DMX & Wireless
Control

Venue-Ready

Build

Plug & Play 

Simplicity

Overview

This compact and powerful fixture is engineered for performers who demand precision and impact. With crystal-clear output, seamless wireless control and reliable DMX integration, it’s the go-to lighting solution for professionals on the move.

Creator Insight

Customer
Reviews

You May Also Like