CRI90 200W COB warm and cold white wash switching 3200K and 6500K with a CTO effect built in, on a 45° beam. The DT 200W COB is a popular choice for karaoke bars, mobile DJ booths and band stages.
From $169.00
| ✔ |
CRI90 Color Rendering200W COB
High color fidelity, so skin tones and products on camera look right
|
| ✔ |
3200K Warm + 6500K Cold WhiteSwitchable
Two color temperatures in one body instead of two sets of fixtures
|
| ✔ |
CTO Effect Built InMatch Practicals
Warm the output to match practical lamps without adding a gel frame
|
| ✔ |
45° BeamBroad And Even
Covers a wall or a stage section with few fixtures and no hotspots
|
| ✔ |
3 kg, 2CH Or 5CH8 To A Road Case
Light, simply patched, and packed for touring in one case
|
From $169.00
Most budget LED fixtures render color at a CRI that flatters the eye and ruins the camera. This COB runs at CRI90, which means skin tones stay natural, white wedding dresses stay white instead of drifting green, and a broadcast feed does not need correcting in post. If a client is filming the event, this is the specification that matters more than raw output.
The fixture carries both a 3200K warm white and a 6500K cold white, so you can move between a tungsten-matched, intimate look and a clean daylight wash from the same unit. Blend the two and you get every point in between. For a venue where house lights are warm but the stage needs something crisper, that range removes the need for gels and the output loss that comes with them.
The built-in CTO effect warms the beam on demand. On a corporate set with tungsten practicals in frame, you dial the COB to match so the foreground and background read as one light source. At a wedding, you warm the wash for the speeches and cool it for the dance floor without touching a gel frame between the two.
A single 200W chip-on-board source produces one soft-edged shadow instead of the composite shadows you get from multi-LED clusters. Combined with the 45° beam angle, that gives a smooth field of light across a stage front, a photo backdrop or a dance floor — the kind of even coverage that reads as a lighting design rather than a set of bright spots.
2CH covers intensity and color temperature, which is all most operators need. 5CH opens up finer control when you want to program temperature changes into a cue stack. DMX is there for a desk, and Master-Slave, Auto and Sound modes let the fixture run on its own when nobody is driving.
Linear 0–100% dimming means a fade from black to full runs smoothly with no visible steps or color shift partway down, and the strobe spans 1–25Hz for anything from a slow throb to a fast hit. Both effects are built into the fixture, so you are not spending a channel on them elsewhere.
At 3 kg (6.61 lb) in a 288 × 230 × 320 mm housing with an IEC input, this is a fixture one person can carry and hang without help. The 8 UNITS & 1 ROAD CASE package at $1,260 gives you a full uplight kit that travels as a single case, which is the practical way to take eight fixtures to a wedding or an event.
A compact wash that earns its place wherever the room is small and the rig has to go up fast: karaoke bars and small venues, mobile DJ booths, band stages, wedding receptions and school or church halls.
Most budget LED fixtures render color at a CRI that flatters the eye and ruins the camera. This COB runs at CRI90, which means skin tones stay natural, white wedding dresses stay white instead of drifting green, and a broadcast feed does not need correcting in post. If a client is filming the event, this is the specification that matters more than raw output.
The fixture carries both a 3200K warm white and a 6500K cold white, so you can move between a tungsten-matched, intimate look and a clean daylight wash from the same unit. Blend the two and you get every point in between. For a venue where house lights are warm but the stage needs something crisper, that range removes the need for gels and the output loss that comes with them.
The built-in CTO effect warms the beam on demand. On a corporate set with tungsten practicals in frame, you dial the COB to match so the foreground and background read as one light source. At a wedding, you warm the wash for the speeches and cool it for the dance floor without touching a gel frame between the two.
A single 200W chip-on-board source produces one soft-edged shadow instead of the composite shadows you get from multi-LED clusters. Combined with the 45° beam angle, that gives a smooth field of light across a stage front, a photo backdrop or a dance floor — the kind of even coverage that reads as a lighting design rather than a set of bright spots.
2CH covers intensity and color temperature, which is all most operators need. 5CH opens up finer control when you want to program temperature changes into a cue stack. DMX is there for a desk, and Master-Slave, Auto and Sound modes let the fixture run on its own when nobody is driving.
Linear 0–100% dimming means a fade from black to full runs smoothly with no visible steps or color shift partway down, and the strobe spans 1–25Hz for anything from a slow throb to a fast hit. Both effects are built into the fixture, so you are not spending a channel on them elsewhere.
At 3 kg (6.61 lb) in a 288 × 230 × 320 mm housing with an IEC input, this is a fixture one person can carry and hang without help. The 8 UNITS & 1 ROAD CASE package at $1,260 gives you a full uplight kit that travels as a single case, which is the practical way to take eight fixtures to a wedding or an event.
A compact wash that earns its place wherever the room is small and the rig has to go up fast: karaoke bars and small venues, mobile DJ booths, band stages, wedding receptions and school or church halls.
| Input power | AC100–240V |
| Power frequency | 50/60Hz |
| Power consumption | 200W |
| Voltage range | Universal — works on US and EU mains |
| Source | 200W COB Dual white LED, CRI90 |
| Average lifespan | 50,000 hours |
| Color | Warm White + Cool White |
| Color temperature | 3200K warm white + 6500K cold white |
| Linear dimming | 0–100% Linear Dimmer |
| Strobe | 1–25Hz |
| Beam angle | 45° |
| Dimmer & strobe | Built-in dimmer and strobe effects |
| CTO effect | Color Temperature Orange effect for matching warm sources |
| Protocol | DMX512 |
| DMX channels | 2/5CH |
| DMX connector | DMX 3-Pin XLR input/output |
| Power connector | IEC input |
| Control modes | DMX / Master-Slave / Auto / Sound |
| IP rating | IP20 — indoor use only |
| Housing color | Black |
| Working ambient temp. | −10°C to 40°C (−14°F to 104°F) |
| Dimensions | 288 × 230 × 320 mm (11.3 × 9.1 × 12.6 in) |
| Weight | 3 kg (6.61 lb) |
Join the list for new product drops, demo videos and stage-lighting tips. One email a week — unsubscribe anytime.
Enter it at checkout for 5% off your first order.
Reviews