AUTO-FOCUS 300W dual-color COB profile with 2700K–7500K tuning, Ra ≥ 95 up to 7,000 lm and an M-size rotating gobo.
$953.00
| ✔ |
Motorized Auto-Focus15°–45° Zoom
The fixture finds sharp focus itself and holds it as the zoom travels
|
| ✔ |
Tunable White, 2700K–7500KRa ≥ 95
Warm and cool white blend on one channel from tungsten through to daylight
|
| ✔ |
M-Size 86 mm GobosRotating
Standard M-size glass gobos drop straight in for projection and texture work
|
| ✔ |
User Selectable Dim CurvesStage / TV / Theatre
Pick the curve that matches the room instead of fighting the dimmer
|
| ✔ |
9.5 kg Die-Cast BodyQuiet Cooling
A temperature-controlled fan keeps it silent enough to sit near talent
|
$953.00
The LK300 is a 300W dual-color COB Leeko — an ellipsoidal profile fixture — with a motorized 15°–45° zoom and a motorized auto-focus system. Aim the fixture once and both the beam size and the focus are driven over DMX from the desk. That removes the single most common reason a profile looks soft in the middle of a show: somebody knocked the lens or the focus drifted and nobody went up to fix it. Operators keep a sharp image through the whole performance without touching the fixture.
Warm White and Cool White COB mixing delivers a linear 2700K to 7500K range, so a single fixture covers everything from a cosy tungsten interior to crisp daylight. The LED source is rated Ra ≥ 95, up to 97, with a luminous flux of ≥ 7,000 lm. High CRI is what separates a professional key light from a bright one: skin tones, costumes, fabrics and products render correctly on camera instead of reading slightly wrong under colored output.
The gobo holder is M-size (86mm) with a rotating gobo system, so standard M-size gobos drop in. That converts the LK300 from a beam source into a projector: logos on a wall, textures across a set, patterns that turn and travel. It is the capability that defines the Leeko format and the reason a profile fixture earns its place on a theatre or corporate rig rather than being replaced by a wash.
Dimming is 0–100% smooth with 4+ curves available: Standard, Stage, TV, Theatre, Architectural and PC. Each one changes how the fixture responds as the level comes down, which matters because a fade that looks right on a stage cut looks wrong on camera and wrong again on a slow architectural change. Choosing the curve for the application is the difference between a fade and a fade that looks deliberate. The 0–25 Hz electronic strobe includes shutter pulse and iris.
Two personalities are available. 7CH covers pan and fine or master dimmer, tilt and fine or color temperature, dimmer, CCT across 2700K–7500K, zoom, auto-focus and a function channel carrying strobe, shutter pulse, iris open and reset — all from the desk. 13CH expands the routing for larger consoles. Protocol is DMX512 with RDM, so addressing and configuration can be done over the DMX line through a 3-pin XLR connection rather than at the fixture.
Power comes in on AC 100–240V at 50/60Hz with a 300W maximum draw, using PowerCon In/Out connectors so several fixtures chain from one feed. Cooling is an intelligent temperature-controlled fan held to low noise, which is what allows the fixture to work in a studio, a theatre or a corporate room where a constant fan whine would be audible. The housing is die-cast aluminum alloy, net weight is ~9.5 kg and the body measures 420 × 220 × 280 mm, with a working temperature range of −20°C to 45°C.
The LK300 is a 300W dual-color COB Leeko — an ellipsoidal profile fixture — with a motorized 15°–45° zoom and a motorized auto-focus system. Aim the fixture once and both the beam size and the focus are driven over DMX from the desk. That removes the single most common reason a profile looks soft in the middle of a show: somebody knocked the lens or the focus drifted and nobody went up to fix it. Operators keep a sharp image through the whole performance without touching the fixture.
Warm White and Cool White COB mixing delivers a linear 2700K to 7500K range, so a single fixture covers everything from a cosy tungsten interior to crisp daylight. The LED source is rated Ra ≥ 95, up to 97, with a luminous flux of ≥ 7,000 lm. High CRI is what separates a professional key light from a bright one: skin tones, costumes, fabrics and products render correctly on camera instead of reading slightly wrong under colored output.
The gobo holder is M-size (86mm) with a rotating gobo system, so standard M-size gobos drop in. That converts the LK300 from a beam source into a projector: logos on a wall, textures across a set, patterns that turn and travel. It is the capability that defines the Leeko format and the reason a profile fixture earns its place on a theatre or corporate rig rather than being replaced by a wash.
Dimming is 0–100% smooth with 4+ curves available: Standard, Stage, TV, Theatre, Architectural and PC. Each one changes how the fixture responds as the level comes down, which matters because a fade that looks right on a stage cut looks wrong on camera and wrong again on a slow architectural change. Choosing the curve for the application is the difference between a fade and a fade that looks deliberate. The 0–25 Hz electronic strobe includes shutter pulse and iris.
Two personalities are available. 7CH covers pan and fine or master dimmer, tilt and fine or color temperature, dimmer, CCT across 2700K–7500K, zoom, auto-focus and a function channel carrying strobe, shutter pulse, iris open and reset — all from the desk. 13CH expands the routing for larger consoles. Protocol is DMX512 with RDM, so addressing and configuration can be done over the DMX line through a 3-pin XLR connection rather than at the fixture.
Power comes in on AC 100–240V at 50/60Hz with a 300W maximum draw, using PowerCon In/Out connectors so several fixtures chain from one feed. Cooling is an intelligent temperature-controlled fan held to low noise, which is what allows the fixture to work in a studio, a theatre or a corporate room where a constant fan whine would be audible. The housing is die-cast aluminum alloy, net weight is ~9.5 kg and the body measures 420 × 220 × 280 mm, with a working temperature range of −20°C to 45°C.
| Input power | AC 100–240V, 50/60Hz |
| Power consumption | 300W Max |
| Power connection | PowerCon In/Out |
| Voltage range | Universal — works on US and EU mains |
| LED | 300W COB (Dual-Color: Warm White + Cool White) |
| Color temperature | 2700K–7500K linear adjustment |
| Luminous flux | ≥ 7,000 lm |
| CRI | Ra ≥ 95 (up to 97) |
| Average lifespan | 50,000 hours |
| Beam angle | 15°–45° (motorized zoom) |
| Focus | Motorized auto-focus (DMX or manual) |
| Gobo holder | M-size (86mm), rotating gobo system |
| Lens | Tempered glass with anti-reflective coating |
| Dimming | 0–100% smooth, 4+ curves (Standard / Stage / TV / Theatre / Architectural / PC) |
| Strobe | 0–25 Hz electronic, incl. shutter pulse & iris |
| Protocol | DMX512 + RDM |
| DMX channels | 7 / 13 CH |
| Connector | 3-pin XLR |
| RDM | Remote addressing and configuration over the DMX line |
| Cooling | Intelligent temperature-controlled fan (low noise) |
| Housing | Die-cast aluminum alloy |
| Working temperature | −20°C ~ 45°C |
| Net weight | ~9.5 kg |
| Dimensions | 420 × 220 × 280 mm |
Reviews